| |
| |
 |
Medium
Duty
Dual Lighting
Cases $249
Custom
Only
Constructed
of 1/4" plywood with a heavy wieght black
vinyl laminate surrounded in aluminum extrusion
and permanently machine split riveted together.
It is then finished with high quality spring
loaded recessed latches and handles. All hardware
is plated for protection against errosion
and weather. The interior is designed to custom
fit many rotating lights on the market. The
case also comes with 3" casters. |
|
|
 |
Heavy
Duty
Dual Lighting Cases
$349
Custom
Only
Constructed
of 3/8" plywood with a heavy wieght black
vinyl laminate surrounded in aluminum extrusion
and permanently machine split riveted together.
It is then finished with high quality spring
loaded recessed latches and handles. All hardware
is plated for protection against errosion
and weather. The interior is designed to custom
fit many rotating lights on the market. The
case also comes with 4" casters.
|
|
|
 |
Medium
Duty PAR
38
ATA Travel Case
$149
In
Stock
Constructed
of 1/4" plywood with a heavy black
vinyl laminate and heavy gauge aluminum
extrusions riveted throughout. It is finished
with all fine rust resistant plated recessed
hardware fittings and steel corners. The
inside has a thick black carpet lining for
protection of your lights. This case will
fit up to 8 standard size par 38 lights
and are separated by hard etha foam dividers.
Each compartment ID measures approx 8"
x 8" x 12 1/2" high and the approx
OD of this case is 36" x 18" x
14" high.
Medium
Duty PAR
56
ATA Travel Case
$169
In
Stock
Constructed
of 1/4" plywood with a heavy black
vinyl laminate and heavy gauge aluminum
extrusions riveted throughout. It is finished
with all fine rust resistant plated recessed
hardware fittings and steel corners. The
inside has a thick black carpet lining for
protection of your lights. This case will
fit up to 8 standard size par 56 lights
and are separated by hard etha foam dividers.
Each compartment ID measures approx 10"
x 10" x 15 1/2" high and the approx
OD of this case is 44" x 22" x
17" high.
Medium
Duty PAR
64
ATA Travel Case
$179
In
Stock
Constructed
of 1/4" plywood with a heavy black
vinyl laminate and heavy gauge aluminum
extrusions riveted throughout. It is finished
with all fine rust resistant plated recessed
hardware fittings and steel corners. The
inside has a thick black carpet lining for
protection of your lights. This case will
fit up to 8 standard size par 64 lights
and are separated by hard etha foam dividers.
Each compartment ID measures approx 11"
x 11" x 18" high and the approx
OD of this case is 49" x 24" x
19" high. |
|
|
 |
Lighting
Equipment
Case $89
In
Stock
Constructed
of 1/8" thick rubberized polyethylene
and permanantly riveted together with aluminum
angle extrusion and steel corners. The case
has two spring loaded handles for carrying
and one which can be used for 'dollying'
the case for optimum portable use. The lid
is strapped on with 2 heavy nylon straps
and buckles and the inside is foam lined.
The ID of the case is: 33 3/4" x 13
3/4" x 14" high. |
|
|
