sales@newyorkcasecompany.com
 
 
 
 
   
   
Medium Duty
Small Head
4 SP Rack
Combo $219

In stock
The top portion of the case is a 4 space (10 1/2") high rack. The shell depth of the case without the lids is 12" and the rear lid adds another 1 1/2" to the rack depth. The lids are foam padded right up to the shell in the head (lower) portion of the case. The ID of the head compartment is 26" wide x 12" deep x 10 1/2" high. Approx OD of this case is: 27" x 16" x 21" high.
Medium Duty
Small Head
6 SP Rack
Combo $239

In stock
The top portion of the case is a 6 space (10 1/2") high rack. The shell depth of the case without the lids is 12" and the rear lid adds another 1 1/2" to the rack depth. The lids are foam padded right up to the shell in the head (lower) portion of the case. The ID of the head compartment is 26" wide x 12" deep x 10 1/2" high. Approx OD of this case is: 27" x 16" x 25" high.
 
 
Constructed of 1/4" plywood with a black vinyl laminate and heavy gauge aluminum extrusions riveted throughout. It is finished with all fine rust resistant plated recessed hardware fittings and steel corners. The inside has a thick black carpet lining for protection of your units.  
Medium Duty
Large Head
4 SP Rack
Combo $219

In stock
The top portion of the case is a 4 space (10 1/2") high rack. The shell depth of the case without the lids is 12" and the rear lid adds another 1 1/2" to the rack depth. The lids are foam padded right up to the shell in the head (lower) portion of the case. The ID of the head compartment is 30" wide x 12" deep x 12 3/4" high. Approx OD of this case is: 31" x 16" x 23" high.
Medium Duty
Large Head
6 SP Rack
Combo $239

In stock
The top portion of the case is a 6 space (10 1/2") high rack. The shell depth of the case without the lids is 12" and the rear lid adds another 1 1/2" to the rack depth. The lids are foam padded right up to the shell in the head (lower) portion of the case. The ID of the head compartment is 30" wide x 12" deep x 12 3/4" high. Approx OD of this case is: 31" x 16" x 27" high.
 

 

Heavy Duty
1/4" or 3/8"

Rack/Head Combo Cases
w/4" casters
1/4" starting at $350
3/8" starting at $400

Custom Only

  • Our heaviest duty case
  • All the best hardware
  • Ball corners
  • 4" casters
  • Full ATA flight case